Turf-Tec catalog page for turfgrass water analysis products for Golf Courses, Sports Turf, Geotechnical, Enviornmental, Engineering and home lawn owners.

Turf-Tec Diagnostic Water Management Products

	23. IN2-W Turf-Tec Infiltrometer $ 475.00
	Instrument is used to determine water infiltration rate easily in a matter of minutes. A must to keep diseases to a minimum. Turfgrass areas can be monitored periodically to determine whether infiltration is staying constant or decreasing. The Turf-Tec Infiltrometer is useful in fields like geology, geotechnical, engineering, hydrology, forestry, environmental testing, hydrogeological, runoff studies, wetland mitigation, permeability testing, sanitation contractors, project planning, stormwater best management practices and EPA requirements. Click here to see literature on this item. Order Quantity
	24. IN5-W - Turf-Tec Infiltration Rings 6 and 12 inch diameter by 4 inches tall Discontinued - please use 25. IN7-W (Below)
	Discontinued - please use 25. IN7-W (Below)
	25. IN7-W - Turf-Tec Heavy Duty Infiltration Rings 6 and 12 inch diameter by 4 inches tall $ 240.00
	The Turf-Tec Infiltration Rings allow for field infiltration rates to be measured in hard or rocky soils. This tool is ideal for turfgrass students. It has a 6 inch inner ring and a 12 inch diameter outer ring with a 4 inch height. A welded gripped handle is attached to the galvanized rings to allow easy insertion into the soil and to insure proper centering of the rings. These Infiltration rings are made of heavy duty 16 Gauge (.065 inch) galvanized steel. Click here to see literature on this item. Order Quantity
	26. IN8-W - Turf-Tec Heavy Duty Tall Infiltration Rings 6 and 12 inch diameter by 7 inches tall $ 350.00
	Turf-Tec Heavy Duty Tall Infiltration Rings have a 6 inch inner ring and a 12 inch outer ring with a 7 inch height. A gripped rubber handle is welded across the rings to keep them concentric and allow easy insertion into, and removal from the soil. These rings are ideal for hard soil types. These Infiltration rings are made of heavy duty 16 Gauge (.065 inch) galvanized steel. Click here to see literature on this item. Order Quantity
	26A. IN8P-W - Turf-Tec Heavy Duty Tall Infiltration Rings 6 and 12 inch diameter by 7 inches tall with Ports $ 395.00
	Turf-Tec Heavy Duty Tall Infiltration Rings are identical to above units but have ports added to allow rings to be attached to IN12-W Mariotte Tubes (Item # 30 not included). The rings have a 6 inch inner ring and a 12 inch outer ring with a 7 inch height. The ports are located three inches above the bottom of the ring to allow up to three inch insertion into the soil. A gripped rubber handle is welded across the rings to keep them concentric and allow easy insertion into, and removal from the soil. These rings are ideal for hard soil types. These Infiltration rings are made of heavy duty 16 Gauge (.065 inch) galvanized steel. Click here to see literature on this item.. Order Quantity
	*27. IN6-W - Turf-Tec Driving Plates for all Turf-Tec 6 and 12 inch Infiltration Rings $ 99.00 Note- Price is for plate only!**
	New! The new driving plate for the Turf-Tec 6 and 12 inch Infiltration Rings allow the infiltration rings to be hammered into the ground for ease of insertion. The specially designed plate fits directly overtop the center handle assembly on the IN5-W, IN7-W and IN8-W model Infiltration Rings. Note- Price is for driving plate only, not rings! Click here to see literature on this item. Order Quantity*
	28. IN10-W Turf-Tec Infiltration Rings 12 and 24 Inch $ 550.00
	The Turf-Tec Infiltration Rings have diameters of 12 and 24 Inches and match ASTM standard D3385-09 for soils with a hydraulic conductivity between 1X10^-2 cm/s or less than about 1 X 10^-6 cm/s or sand type soils with high infiltration rates. These Infiltration rings are made of heavy duty 16 Gauge (.065 inch) galvanized steel. They are constructed of durable steel and braced with welded steel supports to insure the rings stay evenly centered as they penetrate the soil. They are galvanized to prevent rust and insure long life. We suggest also seeing item # 30 - IN12-W Turf-Tec Mariotte Tubes for use with IN10-W (Sold Separately) Click here to see literature on this item. Order Quantity
	28A. IN14-W Turf-Tec Heavy Duty Infiltration Rings 12 and 24 Inch $ 800.00
	The Turf-Tec Heavy Duty Infiltration Rings have diameters of 12 and 24 Inches and match ASTM standard D3385-09 for soils with a hydraulic conductivity between 1X10^-2 cm/s or less than about 1 X 10^-6 cm/s or sand type soils with high infiltration rates. These Infiltration rings are made of heavy duty 14 Gauge (.10 inch) galvanized steel. They are constructed of durable steel and braced with welded steel supports to insure the rings stay evenly centered as they penetrate the soil. They also have a 1/4 inch thick steel band welded along the top edge to allow driving into hard soils. They are galvanized to prevent rust and insure long life. We suggest also seeing item # 30 - IN12-W Turf-Tec Mariotte Tubes for use with IN10-W (Sold Separately) Click here to see literature on this item Order Quantity
	*29. IN11-W Turf-Tec Driving Plates for 12 and 24 Inch Infiltration Rings $ 200.00 Note- Price is for plate only!**
	The new driving plate for the Turf-Tec 12 and 24 inch Infiltration Rings (IN10-W) allow the infiltration rings to be hammered or jacked into the ground for ease of insertion. The specially designed plate fits directly overtop the center handle assembly on the IN10-W model Infiltration Rings. Note- Price is for driving plate only, not rings! Click here to see literature on this item. Order Quantity*
	30. IN12-W Turf-Tec Mariotte Tubes for use with IN10-W or IN8P-W (Above) $ 550.00
	Turf-Tec Mariotte Tubes match the ASTM for standard testing of soils with a hydraulic conductivity between 1X10-2 cm/s or sand type soils with high infiltration rates. These tubes are a companion tool for using with the Turf-Tec 12 and 24 inch Infiltration Rings (IN10-W) or the Turf-Tec Heavy Duty Tall Infiltration Rings 6 and 12 inch with Ports (IN8P-W) . The Turf-Tec Mariotte Tubes match the ASTM Standard D 3385-09 if combined with the IN10-W. They are constructed of heavy wall PVC tubing and have solid brass and stainless steel fittings. * IN10-W or IN8P-W Rings sold separately Click here to see literature on this item. Order Quantity
	31. IN13-W Large Volume Mariotte Tubes for use with 12 and 24 Inch Diameters Infiltration Rings $ 1500.00
	The new Turf-Tec Large Volume Mariotte Tubes match the ASTM for standard testing of soils with a hydraulic conductivity around 1X10-2 cm/s or sand type soils with very high infiltration rates. The new large volume tubes can also hold a large volume of water for extended testing periods. They are constructed of heavy wall PVC tubing and have solid brass and stainless steel fittings. Note these tubes are for very sand soils and hold 100,000 ml (100 liter or about 26 gallons) each. * IN10-W Rings sold separately Click here to see literature on this item. Order Quantity
	32. IN15-W Turf-Tec SDRI 5 foot and 12 foot Infiltration Rings $ 6000.00
	The new Turf-Tec Infiltration Rings have diameters of 5 foot and 12 foot diameter rings that match ASTM Standard D 5093-02 which replaced old ASTM D 5093-90. The Turf-Tec Infiltration Rings are double ring for standard testing of soils with a hydraulic conductivity between 1X10-7 m/s to 1X10-10 m/s or tight soils with very low infiltration rates. Please allow 2 weeks for shipment of the IN15-W Click here to see literature on this item. Order Quantity
BACK TO TOP Click here to go to a alphabetical listing of all products with photos. Click here to go to a alphabetical listing of all products without photos. Click here to go to the page with a group photo of all products.
	33. MS1-W Turf-Tec Moisture Sensor $ 350.00
	The Turf-Tec Moisture Sensor is calibrated in percentages - read outs are immediate. Check moisture at any level from 1 inch to 4 inches deep. Quick adjustable base allows easy depth adjustment. Unit will also identify dry spots before they become visually apparent and water movement problems. Readings are in percentages. Click here to see literature on this item. Order Quantity
	Replacement Part for MS1-W 34. TTMP75-W - Moisture Sensor Replacement Probe and wire (For MS1-W) $ 80.00 This is a replacement probe and wiring assembly for the Turf-Tec Moisture Sensor. Click here to see literature on this item. Order Quantity
	Replacement Part for MS1-W 35. TTMP26-W - Moisture Sensor Replacement 4 inch Steel Spikes (Set 2) (For MS1-W) $ 25.00 These replacement spikes are for the Turf-Tec Moisture Sensor foot assembly. Click here to see literature on this item. Order Quantity
	33A. MSFS1-W Field Scout Digital Moisture Sensor with soft case and one set spikes (TDR 300) $ 1,100.00
	The Field Scout TDR 300 Digital Moisture Sensor allows you to monitor and record soil moisture quickly and accurately with TDR technology (time-domain measurement technology). The Field Scout Digital Moisture Sensor offers turfgrass managers a portable unit to accurately measure soil moisture across the full range of soil moisture conditions. Unit includes standard with a 3 inch (7.5cm) spikes* (You can specify other length probe), software and 7 pin serial cable and soft case. Click here to see literature on this item. *Order Quantity - MSFS1-W Field Scout Digital Moisture Sensor with soft case (Includes 1 set spikes) $1100.00 Order Quantity - MSFSP01 Replacement Spikes 1.5 inch (3.8cm) - (set of 2) $56.00 Order Quantity - MSFSP03 Replacement Spikes 3 inch (7.5cm) - (set of 2) $56.00 Order Quantity - MSFSP04 Replacement Spikes 4.8 inch (12 cm) - (set of 2) $56.00 Order Quantity - MSFSP05 - Replacement Spikes 8.0 inch ( 20 cm) - (set of 2) $56.00 Order Quantity - MSFS1-GPS-Bracket - GPS Unit Mounting Bracket $ 144.00 Order Quantity - MSFS1-USB-Cable - 7 pin Serial to USB Cable $32.00 Order Quantity - MSFS1-Cable - Field Scout GPS / DGPS Cable* $39.00 Order Quantity - MSFS1-Maps - Internet based GPS Mapping (1 year subscription) $198.00 Order Quantity - MSFS1-Case - Replacement Digital Moisture Sensor Soft Carrying Case $114.00**
	33D. MS6-W - Turf-Tec Digital Moisture Sensor $600.00
	The Turf-Tec Digital Moisture Sensor has an adjustable foot which allows > sbrrture at the one, two three and four inch depth without changing probes. Simply slide the adjustable foot to the desired depth, insert the Turf-Tec Digital Moisture Sensor into the soil and after five seconds, read the digital display. The read out is a percentage of soil moisture that is held within the air space in the soil. This state of the art unit is designed to work in all soil types and salinity ranges. The probes are also easily replaceable. The Turf-Tec Digital Moisture Sensor uses a newly designed electrical conductivity sensing circuit that gives quick and reliable readings of soil moisture. With years of science behind the sensing results, there is no easier way to test for soil moisture. Click here to see literature on this item Order Quantity - MS6-W Turf-Tec Digital Moisture Sensor (Includes 1 set spikes)
	Replacement Part for MS6-W
	The Turf-Tec Digital Moisture Sensor has a set of replacement spikes. These ate easily unscrewed and new spike can then be re-inserted into the foot. Note - Spikes are sold in a set of two and it is suggested that they both be replaced at the same time. Spikes are also color coded to insure proper assembly. Order Quantity - MS6P001 Replacement Spikes - (set of 2) (For MS6-W) $90.00
	33B. MS-SCX-01 - Acclaima SCX Soil Moisture Sensor and irrigation override controller $147.00
	The SCX works with your existing irrigation timer, incorporating cutting edge moisture sensing technology to prevent over watering. The SCX Upgrade Kit converts nearly any timer to run on soil moisture, includes one digital TDT moisture sensor and irrigation override controller. Click here to see literature on this item and other sensors and accessories. Order Quantity
	36. ETG1-W Evapotranspiration (ET) Gauge $ 400.00
	This evapotranspiration gauge easily shows the amount of water needed for irrigation by reading the sight glass. All you add is distilled water. Daily readings can be taken to save water. Click here to see literature on this item. Order Quantity
	36A. SKY-MASTER WIND & WEATHER METER $ 200.00
	This easy to use, pocket-size weather station features complete wind speed functions, humidity, dew point, altitude, barometric pressure with 16 hour graph, temperature, wind-chill, heat index and includes a severe weather audio alarm. The unit is also water resistant and closes up into the jack knife style protective case. Click here to see literature on this item. Order Quantity
	37. PUGS2-W Turf-Tec Precipitation / Uniformity Gauges $ 225.00
	This set of 20 calibrated gauges will indicate how much water is being applied by each sprinkler head and how uniform is the coverage. Simply set out the gauges between the sprinkler heads and run your irrigation cycle for 15 minutes. Find out if sprinkler systems are working properly. Click here to see literature on this item. Order Quantity
BACK TO TOP
	38. ROM3-W - Wireless Rain Gauge with Outdoor Thermometer and 9-day Memory $ 59.95
	Turf-Tec Wireless Rain Gauge is wireless and includes a 9-day memory function plus an indoor/outdoor temperature. This electronic rain gauge has a self-tipping bucket that automatically empties after each 4/100th inch (1 mm) of rain. The reading is recorded on a LCD counter which mounted indoors. It is also an Electronic Rain Gauge, Electronic Outdoor Thermometer and an Electronic Indoor Thermometer with memory highest and lowest temperatures. Click here to see literature on this item Order Quantity
	41. TCLEAN1-M Trim-Clean Sprinkler Head Trimmer $ 199.00
	This new tool is simply inserted over sprinkler heads and heavy gauge serrated stainless steel blade is rotated to cut grass and stolons around head. Unit has interchangeable heads that allows 5", 6", 7" or 8" inch blades to be attached the 32 inch heavy duty handle. Trim Clean is sold with one handle and one cutter blade. Please specify cutter blade size when ordering. Click here to see literature on this item. Order Quantity Trim Clean with 5" Head $199.00 Order Quantity Trim Clean with 6" Head $199.00 Order Quantity Trim Clean with 7" Head $199.00 Order Quantity Trim Clean with 8" Head $199.00
	Replacement Part for TCLEAN1-M 42. TCLEAN-Head - Replacement head for Trim Clean Sprinkler head trimmer $ 80.00 This head replaces the worn head on the Trim Clean Sprinkler Head Trimmer. Order Quantity 5" Order Quantity 6" Order Quantity 7" Order Quantity 8"
	43. DTB size-M Donut Trimmer Edging Blades (Set 6) $ 170.00
	Blades attach on your string trimmer and allow you to trim around sprinkler heads with one pass. They are made to fit right over the sprinkler heads for trimming. Blades come in 6", 7" and 8" diameters. Six blades per package. Mix and match any size you need. Click here to see literature on this item. Order Quantity DTB-6-M - Set of 6 - 6 inch Donut Trimmer Edging Blades Order Quantity DTB-7-M - Set of 6 - 7 inch blades Order Quantity DTB-8-M - Set of 6 - 8 inch blades Order Quantity DTB-A-M - Set of 6 Assorted Blades - 2-6 inch, 2-7inch, 2-8 inch blades
	44. LYS1-W Turf-Tec Lysimeter $ 995.00 2 Units $ 796.00 Each - 3+ Units $696.50 Each
	The Turf-Tec Lysimeter is designed for the purpose of finding out how much water is percolating out of a root zone. This information will aid in the management of turfgrass areas by insuring that nutrients and chemicals will remain in the target area within the soil profile. It is also helpful in determining when you have properly leached materials like salt from the root zone. Click here to see literature on this item. Order Quantity
	AQ__-M (Size) Aqua-Quicks w/90 Adapter 45. (Group 1 per set of 2) $ 210.00 46. (Group 2 per set of 2) $ 220.00
	Group 1: Toro 630, 640, 650, 660, 670, 680, 730, 750, 780, 830, 853, 850, 855, 860, 880 and Eagle 700 and 750. Group 2: Toro 690; Rainbird 51, 91 and Eagle 900. Aqua-Quicks are sold 2 per set w/riser and 2 hose adapters (3/4" or 1"). This device can turn any Rainbird or Toro valve-in-head sprinkler into a 1" water source. Made of solid aluminum, simply remove the sprinkler head drive and put the Aqua-Quick in its place. PLEASE SPECIFY TYPE, SIZE OF AQUA-QUICK AND SIZE OF HOSE ADAPTORS. Click here to see literature on this item. Click here to order this product.
BACK TO TOP Click here to go to a alphabetical listing of all products with photos. Click here to go to a alphabetical listing of all products without photos. Click here to go to the page with a group photo,